General Machine Products 89910 Whisper Micro Fiber Cable Blowing Machine - Manual (Page 9)

Page 9 General Machine Products Co., Inc.
3. GENERAL DESCRIPTION
The GMP Whisper Micro Cable Blowing Machine is
designed to install micro fiber cable into micro tubes.
The Whisper uses a user supplied variable speed drill
to drive a compliant roller.
The shaft is covered with a rubber roller to prevent
damage to the cable. The roller may be changed
quickly using one simple tool.
The pressure the rollers apply to the cable is adjusta-
ble.
A full range of accessories is available to allow the
machine to handle a wide range of cables and micro
tubes.
The Whisper may be placed on a stand or on the optional tripod kit to bring the cable to a suit-
able height. The Whisper is supplied with a reinforced soft case which will protect the ma-
chine from damage during transit and storage.
On left is the Whisper assembled for a
typical blowing operation. Shown is the
unit with the optional Tripod Mounting Kit
(P/N 89945) and a user supplied variable
speed drill.