General Machine Products 89300 AirStream Cable Blowing Machine - Manual (Page 22)

Page 22 of 44
7.0 Procedure for changing inserts in the tube clamp
8.0 Procedure for changing inserts in the air box
► Loosen the thumb nut, rotate the
swing bolt to open the tube clamp hous-
ing
► Loosen and remove the (2) m2.5 fixing
screws. (Do not lose these screws, they
will be needed for the replacement in-
sert).
► Remove the insert
► Loosen the thumb nut, rotate the swing bolt to
open the air box
► Loosen and remove the m4 fixing screw.
(Do not lose this screw, it will be needed for the
replacement insert)
► Remove the insert
► Repeat the process for the insert in the other
box half
► To fit the new inserts, reverse the disassem-
bly procedure.