General Machine Products 89300 AirStream Cable Blowing Machine User Manual
Page 5
Page 5 of 44
been closed on to the cable. Do not turn the air on until a reasonable length of cable 150 ft. (50m) has
been installed into the tube.
23. Ensure the cable drum rotates freely on its stand, the cable should leave from the top of the drum.
24. The cable should enter the machine in a clean and dry condition. In damp, dusty atmospheres, the cable
should be cleaned continuously as it enters the machine.
FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY, AS THE CABLE
COULD BE EJECTED FROM THE CABLE BLOWING MACHINE WITH HIGH
FORCE AND VELOCITY.
If the connecting plug on the power lead to the generator / (or supply) supplied with the Airstream machine is
unsuitable and requires replacement, the new plug must be correctly connected observing the color codes as
below.
IT IS THE RESPONSIBILITY OF THE USER TO ENSURE THAT THE CONNECTIONS MEET THE
ELECTRICAL REGULATIONS FOR THE RELEVANT COUNTRY.
Brown (Live)
Yellow & Green (Earth)
Blue (Neutral)
Black (Live)
White (Neutral)
Green (Earth)
Alternative Wiring