GeoDesy FSO Next series - Manual (Page 23)

GeoDesy Kft.
H-1116 Budapest, Kondorfa str. 6
Device setup
The device setup screen leads you to the main monitoring options. Here the alarms
can be set and main information about the Laser head.
Device name: uniqe identifier of
the device
Managed head: Type of the laserhead
Detector alert level: when the
received level reach this value,
the alarm will be triggered.
Temperature alert level: when the temperature reach this value, the alarm will be
triggered.
Auto MDI/MDI-X: this enables
the
Auto setting for the
MDI/MDI-X, some old switch
types
might report
incompatibility here it can be switched off. (Auto MDI/MDI
in the Xs systems)
Motherboard Firmware version:
File image version: Version number of the file image
Motherboard Serial number:
as the Head Serial Number)
Head Serial number: Serial number of the unit. Should be the same number as the
one on the back of the unit. If the number is missing or not match up with the one on
the back, during activation this is the number you will have to let the support know.
Telefon: 06
. 6-8.
E-mail: info@geodesy
http://www.
23
The device setup screen leads you to the main monitoring options. Here the alarms
can be set and main information about the Laser head.
uniqe identifier of
Type of the laserhead
when the
received level reach this value,
when the temperature reach this value, the alarm will be
this enables
the Auto setting for the
X, some old switch
types might report
incompatibility here it can be switched off. (Auto MDI/MDI-X can be turned off even
Motherboard Firmware version: This is the version number of the Firm
Version number of the file image
Motherboard Serial number: Mainboard serial number inside the head (Not the same
as the Head Serial Number)
Serial number of the unit. Should be the same number as the
back of the unit. If the number is missing or not match up with the one on
the back, during activation this is the number you will have to let the support know.
Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
[email protected]
http://www.geodesy-fso.com
The device setup screen leads you to the main monitoring options. Here the alarms
when the temperature reach this value, the alarm will be
X can be turned off even
This is the version number of the Firmware
Mainboard serial number inside the head (Not the same
Serial number of the unit. Should be the same number as the
back of the unit. If the number is missing or not match up with the one on
the back, during activation this is the number you will have to let the support know.