GeoDesy FSO Next series - Manual (Page 5)

GeoDesy Kft.
H-1116 Budapest, Kondorfa str. 6
very hard receiver sensitivity. These two factors combined to provide one of the best
performing
FSO systems on the market today.
To meet the demands for every higher bandwidth,
continues to invest heavily in research and development with the newest product line
which offers Gigabit speeds being launched.
This manual describes the
transmission system.
The
GeoDesy FSO Next
laser transmission for two Mbps up to 1000 Mbps data to the air, where a clean line
of site is available. It delivers the most eff
computer networks or telephone exchanges.
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
Suitable for factories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
other natural or artificial obstacles, where cable is not available.
The transmission technique used
transparent and wire-speed data transfer with virtually zero latency. Because they
use infrared light as the transmission medium,
require frequency licenses and the transmission is not effected by electro
or radio-frequency interference. Basically the
considered as a virtual fibre in the air, which ends in real fibre optic cable at both
ends.
Our product is built using high quality components for operation in even the most
adverse conditions.
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air
The
GeoDesy FSO X
interconnection units (OIU)
in the outdoor unit together with the PSU of the system.
Best practises were employed in
GeoDesy FSO .
Telefon: 06
. 6-8.
E-mail: info@geodesy
http://www.
5
very hard receiver sensitivity. These two factors combined to provide one of the best
systems on the market today.
et the demands for every higher bandwidth, GeoDesy FSO
continues to invest heavily in research and development with the newest product line
which offers Gigabit speeds being launched.
This manual describes the GeoDesy FSO Next series of free space laser
Next product range offers cost effective reliable free space
laser transmission for two Mbps up to 1000 Mbps data to the air, where a clean line
of site is available. It delivers the most effective point-to-point connection between
computer networks or telephone exchanges.
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
actories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
other natural or artificial obstacles, where cable is not available.
The transmission technique used in the GeoDesy FSO d
speed data transfer with virtually zero latency. Because they
use infrared light as the transmission medium, GeoDesy FSO
require frequency licenses and the transmission is not effected by electro
frequency interference. Basically the GeoDesy FSO
considered as a virtual fibre in the air, which ends in real fibre optic cable at both
Our product is built using high quality components for operation in even the most
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air
systems comprise two laser-heads and the two indoor
interconnection units (OIU) - one at each end. The interface connections are housed
in the outdoor unit together with the PSU of the system.
Best practises were employed in cost engineering throughout the development of
Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
[email protected]
http://www.geodesy-fso.com
very hard receiver sensitivity. These two factors combined to provide one of the best
GeoDesy FSO
( Europe) Limited
continues to invest heavily in research and development with the newest product line
series of free space laser
product range offers cost effective reliable free space
laser transmission for two Mbps up to 1000 Mbps data to the air, where a clean line
point connection between
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
actories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
devices provides
speed data transfer with virtually zero latency. Because they
GeoDesy FSO system do not
require frequency licenses and the transmission is not effected by electro-magnetic
GeoDesy FSO link can be
considered as a virtual fibre in the air, which ends in real fibre optic cable at both
Our product is built using high quality components for operation in even the most
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air isolation.
heads and the two indoor
one at each end. The interface connections are housed
cost engineering throughout the development of