GeoDesy FSO Next series - Manual (Page 25)

GeoDesy Kft.
H-1116 Budapest, Kondorfa str. 6
SNMP Setup
One of the main features of the device is the SNMP(Simple Network Monitoring
Protocol). The SNMP settings can be set on this page.
Trap address: The IP address of the SNMP trap over the network.
Trap events in the system you have
possibility to setup three different trap
event.
For further details on the trap event see
Trap event list chapter of
SNMP Agent.
SNMP trap address: IP address of the
SNMP tarp computer
Read Community and Read Write
community To the setup of the Read
and the Read-Write community, the
preset value is public
Agent UDP Port the SNMP agent UDP
port number (1
1000) the preset value
is 162
Trap UDP Port: the SNMP trap UDP
port number (1
1000) the preset value
is 161
Traps:
The Laserhead is sending two different traps:
LaserHeadAlarm (OID:
of the alarms will go on (for alarm setting please see chapter 5.4)
LaserHeadAlarmCancel
(OID:
this trap will be sent
Telefon: 06
. 6-8.
E-mail: info@geodesy
http://www.
25
One of the main features of the device is the SNMP(Simple Network Monitoring
otocol). The SNMP settings can be set on this page.
Trap address: The IP address of the SNMP trap over the network.
s in the system you have
possibility to setup three different trap
For further details on the trap event see
Trap event list chapter of this book. In this section there are the settings of the
: IP address of the
and Read Write
To the setup of the Read
Write community, the
the SNMP agent UDP
port number (1 1000) the preset value
: the SNMP trap UDP
port number (1 1000) the preset value
The Laserhead is sending two different traps:
1.3.6.1.4.1.17857.0.1201) This trap will be sent after any
of the alarms will go on (for alarm setting please see chapter 5.4)
(OID: 1.3.6.1.4.1.17857.0.1202) After the alarm goes off
Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
[email protected]
http://www.geodesy-fso.com
One of the main features of the device is the SNMP(Simple Network Monitoring
In this section there are the settings of the
1.3.6.1.4.1.17857.0.1201) This trap will be sent after any
1.3.6.1.4.1.17857.0.1202) After the alarm goes off