Heidolph MR Hei-Tec - Manual (Page 15)

7
Device description
The device is a magnetic stirrer and has the following functions:
 Stirring of substances.
 Heating of substances.
Stir and/or heat the substances in a heat-resistant stirring container, with the underside on the hotplate. Set
the stirring speed and heating temperature individually using the operating elements.
Storage & transport
CAUTION
Damages as a result of improper transport!
Damage can be caused to the device and the device mechanics in the
case of improper transport.
 Avoid jolting and impacts.
 Do not store equipment in box while hot.
 Store and transport the device in the original packaging.
 Seal the packaging with adhesive tape.
 Store the device in a dry location.
 To carry the device, lift it from below.
Unpacking the device
1. Unpack the device and if necessary, remove any protective films.
2. Check scope of supply.
Has the device been damaged or is delivery incomplete?
 Please inform Heidolph Instruments.
Installation
Device
CAUTION
Toppling of the device with attachment!
Risk of injury and damage to the enclosure.
 Place the device on a flat, solid, temperature-resistant and dry sur-
face with sufficient space.
 Use suitable lifting equipment.
WARNING
Hazardous materials and solvents!
When handling hazardous materials and solvents, chemicals can be re-
leased into the atmosphere.
 Do not expose operating personnel to harmful vapors or gases. Ex-
tract waste air using a vapor outlet.
 Ensure that the separator for the power supply is easily accessible at
all times.
 Double-check if components are damaged.
 Double-check setup.