Applied standards and guidelines, Safety instructions, Warning notices – Heidolph MR Hei-Tec User Manual

Page 9

Advertising
background image

1

Applied standards and guidelines

NOTICE

EC declaration of conformity
 See the "EC declaration of conformity" enclosed.

Safety instructions

WARNING

Risk of injury due to failure to observe safety signs and safety in-
structions!

Dangers emerge when safety signs, located on the device, are not ob-
served or when safety instructions detailed in the operating instructions
are not followed.
 Please note the safety signs.
 Please carefully read and observe the safety instructions provided.

Warning notices

The design of warning notices is based on a combination of signal words and continuous text.

In this way, the signal word indicates the level of risk. The following table explains the significance of each of
the signal words.

Signal word

Meaning

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death or seri-
ous injury.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury.

NOTICE

NOTICE indicates a property damage message


The warning notice also provides information on the type and source of the danger, the possible consequences
of the danger and measures to prevent any danger arising. The following example warning notice indicates
the design of a warning notice.

DANGER

The type and source of the danger are displayed here!

Here, the possible consequences are described when no measures are taken to prevent
dangers occurring.
 Here, the measure for risk prevention is specified.

Other symbols used in these operating instructions provide information on the handling instructions. The fol-
lowing table explains the use of each symbol.

Symbol

Use

Explanation

Handling instructions

Here, you are required to take action.

1.
2.
3.

Handling instructions, multi-step

The handling instructions must be carried out in the
sequence specified. Deviations from this sequence
may lead to damage to the device or accidents.

Advertising
This manual is related to the following products: