Heidolph MR Hei-Tec - Manual (Page 7)

Key to illustrations
MR Hei-Standard (page A, C)
1 Hotplate
2 Mains switch: Switch device on/off
3 Speed control knob: Set set speed
4 LED I/O: Device on/off
5
Heating button: Switch heating function on/off
6 LED light for heating function: Device heats up/does not heat up
7 Temperature control knob: Set set temperature
8 Drill hole for support rod with protective cap
9 Temperature sensor socket
10 Power plug
11 Support rod
12 Temperature sensor Pt 1000
13 Attachment with cable inlet
MR Hei-Tec (page D, E)
1 Hotplate
2 Mains switch: Switch device on/off
3 Control panel
4 Rotary-push button Hei-GUIDE: Set and determine the set speed/set temperature
5 Heating button: Switch heating function on/off and switch between Fast-/Precise-Mode
6
Stirring button: Switch stirring function on/off
7 Display
8 set rotation: Indicates the set speed
9 Stirring symbol: The device is stirring
10 Rotation speed and mode: Displays actual speed/set speed and Fast-/Precise-Mode
11 set temp: Indicates the set temperature
12 set temp ext: Indicates the set temperature and temperature control using the temperature sensor
13 ext: Indicates the temperature control using the temperature sensor
14 Heating symbol [flashing]: Is shown when heat energy is supplied
15 Temperature: Displays actual temperature/set temperature and Fast-/Precise-Mode
16 Selection frame: Highlights the pre-selected value
17 Drill hole for support rod with protective cap
18 Temperature sensor socket
19 Power plug
20 Support rod
21 Temperature sensor Pt 1000
22 Attachment with cable inlet
F