INFICON PGD400 Pirani Gauge Display User Manual
Page 13
Advertising
tinb14e1 (2009-07)
13
For mounting the PGD400 into a control panel, the following cut-
out is required:
105
91.2
78
69
M3 or ø 3.5
The admissible maximum
ambient temperature
(
→
9) must not be
exceeded neither the air
circulation obstructed.
For reducing the mechanical strain on the front panel, preferably
support the unit.
Slide the PGD400 into the cut-out of the control panel …
… and secure it with four M3 or equivalent screws.
Advertising