INFICON PGD400 Pirani Gauge Display - Manual (Page 16)

16 tinb14e1 (2009-07)
Pin assignment SENSOR
Pin assignment of the
8-pole RJ45 appli-
ance connector:
8 1
Pin Signal
4
1
2
3
5
6
7
8 Identification
Supply +24
VDC
Supply common GND
Signal input
(Measurement signal+)
Signal common (Measurement signal–)
not connected
not connected
not connected
3.4 OUTPUT Connector
This connector allows to read the measurement signal and to
evaluate state of the floating switching function.
Connect the peripheral components to the OUTPUT
connector on the rear of the unit. Use a screened cable
(electromagnetic compatibility).