INFICON PGD400 Pirani Gauge Display - Manual (Page 27)

tinb14e1 (2009-07) 27
6 Troubleshooting
Signalization of errors
Error messages
Possible cause and remedy / acknowledge-
ment
Interruption or instability in sensor line or
connector (Sensor error).
Possible cause and remedy / acknowledge-
ment
Pirani error (sensor defective).
Ö Replace the sensor
Status messages
Possible cause and remedy / acknowledge-
ment
0.5 V < measurement signal < 1.5 V
Ö Adjust the gauge ( → [1]).
10.3 V < measurement signal < 13.7 V
Ö Adjust the gauge ( → [1]).