INFICON PSG55x ATM to Medium Vacuum Gauge (DeviceNet) - Manual (Page 7)

tira58e1-a (2012-03) PxG5xx.cp
7
2 Interface Connection
For operating the PCG5xx / PSG5xx gauge via DeviceNet, an interface cable
conforming to the DeviceNet standard is required.
If no such cable is available, make one according to the following indications.
A shielded special 5 conductor cable conforming to the DeviceNet standard has to
be used (
→  [3] and [4]).

Make the DeviceNet interface cable according to the following indications:
3
1
4 2
5
Micro-Style, 5-pin,
(DeviceNet)
female, soldering side
Pin 1 Drain
Pin 2 Supply +15 … +30 VDC
Pin 3 Supply common GND
Pin 4 CAN_H
Pin 5 CAN_L
Pin assignment of the FCC, D-Sub and Hirschmann sensor connector
according to the respective operating manual (
→  [1], [2].

Plug the DeviceNet (and sensor) cable connector into the gauge.
DeviceNet cable

Lock the DeviceNet (and sensor) cable connector.
Making a DeviceNet interface
cable
Cable type
Procedure