INFICON SKY CDG160D 1 ... 1000 Torr / mbar User Manual
Page 18
Advertising
18
tina53e1-c (2011-11)
Mount the gauge so that no vibrations occur. The gauge
may be mounted in any orientation. To keep conden-
sates and particles from getting into the measuring
chamber preferably choose a horizontal to upright posi-
tion. If adjustment should be possible after the gauge
has been installed, be sure to install it so that the but-
tons can be accessed with a pin (
→ 24).
Remove the protective lid and connect the product to the
vacuum system.
Seal with centering ring
Protective lid
Clamp
Keep the protective lid.
Advertising
This manual is related to the following products: