INFICON Cube CDGsci (Web Interface) - Manual (Page 10)

10
tira92e1-a (2014-07) CDGsci Web Interface.cp
• Settings for LAN and WLAN
• Backup and restore of user settings
• Factory Reset
The IP address / Subnet of the LAN interface can be changed. Clicking <Apply>
will open a confirmation window. The gauge will reboot after clicking on <OK>.
Cube can be connected to a wireless access point using DHCP. Ad hoc
connections are not possible. With <Scan>, Cube searches for accessible net-
works. Selecting the proper network and inserting the password will connect to this
network after clicking <Connect>.
Connecting to the access point may take up to 20s. Thereafter, the IP address and
Subnet mask are displayed.
User settings can be backed up and restored using the <Backup Settings> and
<Restore Settings> buttons. Up to 10 sets can be stored and differ by number.
Clicking on this button will reload the Cube gauge factory settings. All settings,
configurations and options set by the user will be deleted.
1.8 Tab <Configuration>
LAN Settings
WLAN Settings
Backup / restore settings
Reset Factory