INFICON Cube CDGsci (Web Interface) - Manual (Page 11)

tira92e1-a (2014-07) CDGsci Web Interface.cp
11
• Firmware upgrade
The <Browse…> button opens a file dialog in which the upgrade file, e.g.
"SilverlineFactory-Vxxxxx.zip" can be selected. The new firmware is transmitted to
the gauge by clicking <Submit>. An automatic reset of the gauge is performed, if
the upgrade was successfully. Updating the firmware takes approx. 3min.
The new firmware version is displayed on the left side in the information section
under the Cube image.
1.9 Tab <Upgrade>