Intelix DL-DVI-R100 - Manual (Page 8)

DL-DVI Installation Guide
8
Installation Instructions
Quick Start
Connect Source
1. Connect source
2. Connect display
3. Apply power
4. Adjust signal
Connect the video source to the DL-DVI-S with a DVI-D cable.
If using S/PDIF audio, connect the audio source to the DL-DVI-S
with a coaxial S/PDIF cable.
Set the audio selector switch to the audio connection that will
be used in the installation.
If using analog audio, connect the audio source to the DL-DVI-S
with a 3.5 mm stereo audio cable.