Intelix DIGI-HD-XR User Manual

Digi-hd-xr installation manual, Maximum recommended distances

Advertising
background image


8001 Terrace Ave
Suite #201
Middleton, WI 53562

Phone: 608-831-0880
Toll-Free: 866-4-MATMIX
Fax: 608-831-1833

DIGI-HD-XR Installation Manual

The Intelix DIGI-HD-XR transmits HDMI and IR up to 300’ over
one or two twisted pair cables (depending on installation). In
environments with high electromagnetic interference (EMI),
shielded twisted pair cables should be used.

Built-in HDshāk® technology provides dynamic HDMI,
EDID/DDC and HDCP mode selection, guaranteeing
performance and image quality.

The DIGI-HD-XR features electrostatic discharge (ESD)
protection circuitry which safegaurds the HDMI circuit against
static electricity and other destructive stray voltage.


Maximum Recommended Distances

1080p

1080i

720p

576i/p

480i/p

Shielded

Cat 6a

150’

300’

300’

300’

300’

Cat 6

110’

220’

220’

220’

220’

Cat 5e

100’

200’

200’

200’

200’

Important notice:

Do not attempt to disassemble or alter the extender
housing. There are no user-serviceable parts inside the
unit. Doing so will void your warranty.

To minimize the possibility of equipment damage from
electrostatic discharge (ESD), all source and destination
equipment must be powered off during installation.

Do not connect the extender to a telecommunication outlet
wired to unrelated equipment. Doing so may damage the
unit or any connected equipment. Ensure all connected
twisted pair cabling is straight-through (point-to-point).

Allow proper ventilation to reduce the risk of thermal
failure.

Advertising