Intelix DIGI-DVI-F - Manual

Intelix DIGI-DVI-F
Installation Manual
Introduction
The active Intelix DIGI-DVI-F balun allows a DVI (digital visual interface)
video signal to be transmitted up to 150 feet via inexpensive twisted pair
cabling, such as Cat 5e or Cat 6. The DIGI-DVI-F supports standard HDTV
and VESA resolutions, as well as the DDWG standard for DVI compliant
monitors. In addition, the unit is Mac compatible and HDCP compliant.
Two individual runs of twisted pair cable are required when installing the
DIGI-DVI-F balun. Two runs of Cat 5e are required for 480i, 480p, 720p, and
1080i video. In environments susceptible to high electromagnetic interference,
two shielded twisted pair cables should be used.
The Intelix DIGI-DVI-F includes a send balun, receive balun, and one power
supply. The system is powered on either the send or receive end.