Intelix DIGI-88B - Manual (Page 13)

DIGI-88B Installation Guide
IP Address Assignment
The DIGI-88B ships from the factory with a default IP address of 192.168.0.178. You can change this IP
address to a different static IP address or to DHCP using the DIGI-88B Docklight configuration file, which
can be found on the Intelix website.
Static IP assignment via RS232
The Static IP address can be changed using RS232
1. Download Docklight and the DIGI-88B from the Intelix website.
2. Connect the included USB -> RS232 adapter to an open USB port on your computer, or if you have
a serial port, connect a straight through serial cable. When using the
USB->RS232 adapter for the first time, device drivers should be automatically installed.
3. Open the Docklight Configuration File.
4. Confirm the Docklight communication settings
(Docklight -> Tools -> Project Settings) match the
device. 9600/8/n/1 on the COM port named USB Serial
Port (or COM 1 if using your computer’s serial port
instead of the adapter.
5. Start Communication.
6. Turn the power to the
DIGI-88B on – after 5 seconds, the DIGI-88B will send some lines of
information you can see in the communications window. This confirms
that you are communicating properly.
13