Intelix DIGI-88B - Manual (Page 6)

DIGI-88B Installation Guide
Front Panel
1 – Power LED – Device is ON when LED is lit
2 - LED Display – Routing information is displayed.
3 - Input Buttons –Buttons labeled “1-8”.
4 - Operational Buttons (Top Row) –Buttons labeled “CLEAR” and “TAKE”.
CLEAR – Used to cancel the current input selection.
TAKE – Used to make the changes active.
5 - IR Receiver – For use with the included IR remote.
6 - Output Buttons – Buttons labeled “1-8”.
7 - Preset Buttons (Bottom Row) –Buttons labeled “STORE” and “RECALL”.
STORE – Used to save a preset to memory.
RECALL – Used to load a preset from memory.
8 – Chassis Feet –Factory installed feet for shelf top installations
9 – Rack Ears – Optional rack ears for rack mounting the DIGI-88B in an equipment rack.
Explanation of use for the front panel control is located in the section Front Panel and IR Remote Operation
(page 10).
1 2 3 4
7 6 5 8 9
6