Intelix DIGI-88B - Manual (Page 18)

DIGI-88B Installation Guide
10. In the “Send Sequences” window, press the Set IP
(Use Wildcards) button.
11. Type the desired IP address in 3 byte
sequences, pressing the Enter key on your
keyboard after each sequence.
12. Verify that the IP address changed
in the communication window. .
*Note – it can take 5-10 seconds for
the unit to report back the
confirmed change.
DHCP IP assignment via TCP/IP
Setting the DIGI-88B to DHCP while connected via TCP/IP is not recommended.
18