Edid management, Edid table, Changing edid modes – Intelix DIGI-88B User Manual

Page 9: Edid copy instructions

Advertising
background image

DIGI-88B Installation Guide

EDID Management

HDMI signals require communication between the Source and Display equipment. The Display provides

information to the source on supported formats for video and audio. The information that is passed from

display to source is referred to as EDID. The DIGI-88B includes common EDID’s for increased compatibility.

The matrix also features an EDID copy mode that can be used when other EDID’s do not meet the

installation requirements.

The default EDID for the DIGI-88B is 1080p with stereo audio. All EDID modes are outlined in the table

below:

EDID Table

EDID Setting

Dipswitch 1

Dipswitch 2

Dipswitch 3

Dipswitch 4

EDID Copy

0 (Down)

0 (Down)

0 (Down)

n/a

No Function

0 (Down)

0 (Down)

1 (Up)

n/a

1080p 7.1ch Audio

0 (Down)

1 (Up)

0 (Down)

n/a

1080p 5.1ch Audio

0 (Down)

1 (Up)

1 (Up)

n/a

1080i Stereo

1 (Up)

0 (Down)

0 (Down)

n/a

1080p Stereo (Default)

1 (Up)

0 (Down)

1 (Up)

n/a

1080p 3D Video / 2ch Audio

1 (Up)

1 (Up)

0 (Down)

n/a

No Function

1 (Up)

1 (Up)

1 (Up)

n/a

Changing EDID Modes

To change the EDID mode on the matrix:

1. Power down the DIGI-88B matrix.

2. Change the dipswitch to the desired EDID mode (outlined in the table above).

3. Power on the DIGI-88B matrix. The new EDID has been stored at all the inputs.

EDID Copy Instructions

To copy an EDID from a specific output to a specific input (for example, output 3 to input 2):

1. Power down the DIGI-88B matrix.

2. Change the dipswitches to 0, 0, 0, 0 (Down, Down, Down, Down).

3. Connect the HDMI cable of the display to the desired output on the DIGI-88B matrix (output 3).

You can use either HDMI or HDBT outputs, but only connect one at a time for copy operation.

4. Power on the DIGI-88B matrix.

5. Using the front panel, setup the AV route, from the input you want the EDID to be copied to, to

the output you connected the display you want to copy. (input 2 to output 3)

6. Press and Hold the Output Button connected in Step 3 (output 3).

7. Wait for Display to show “CPY” and “OK”.

8. EDID has been successfully copied.

9

Advertising