5 wiring of the screw terminals, Wiring of the screw terminals, 4 electrical connection – JUMO 709050 IPC IGBT Power Converter IPC 70/100A Operating Manual User Manual
Page 28
Advertising
4 Electrical connection
28
[IGBT Power Converter 70/100A] 02.08
4.1.5 Wiring of the screw terminals
Position
The following diagram shows the position of the screw connections in the
power section, the screw terminals on the PCB as well as the general
connection arrangement.
A
Only tighten the green screw terminals in the control section with a
tightening torque of 0.5 to 0.6 Nm!
Connection for
terminal screw X109
Detail
Voltage supply
Control section
L1
N (L2)
Connection for
Screw connections in
the power section
Detail
Voltage supply to power section
U
N(V)
Protective earth
PE
Functional equipotential bonding
v Chapter 3.1.1 „Correctly wire all
FB
Advertising