JUMO 706560 LOGOSCREEN es Operating Manual - Manual (Page 73)

73
4 Configuration parameters
4.2.1 Parameterization
Parameter Value/selection Description
Contrast Parameters
➔ Contrast 0 to 13 31 Display brightness
Speed indication Parameters
➔ Speed indication in mm/h, time/div
CF card (external)
(memory display) Parameters
➔ Memory display
➔ CF card (external)
Always,
If inserted,
Never Your can select here if and
how the available memory
of the external
CompactFlash memory
card is displayed in the
status line.
Int. memory: for
(memory display) Parameters
➔ Memory display
➔ Int. memory: for
Ser. read-out
Read-out via CF
v See “Memory
indication” on page 56.
Switch-off event
(display off) Parameters
➔ Display off
➔ Switch-off event
Waiting time,
Control signal The type of display switch-
off is selected here
Waiting time
(display off) Parameters
➔ Display off
➔ Waiting time
0 — 32767min Time after which the
display is switched off. Any
key stroke will re-activated
the display. The parameter
can only be entered if the
parameter Switch-off event
is set on “Waiting time”.
0 = display not off