Kinetik Your fitness HRM2 - Manual (Page 13)

Using the Kinetik Watch and Heart Rate Monitor
12
Alarm
1 . Press "mode" until you reach the alarm function.
2 . Press and hold "set/reset/-" for 3 seconds, until the hour flashes.
3. Set the hour by pressing "set/reset/-" (to count down) or "start/stop/+" (to count up).
4. Press "mode" again until the minute flashes. Follow step 2 to set the minutes.
5. Press "mode" to confirm the alarm time settings.
6. To activate the alarm press "set/reset/-" until is displayed.
7. To turn the alarm off, press any button (except the "EL backlight" button).