Kinetik Blood Pressure BPM1KTL - Manual (Page 11)

Using your Blood Pressure Monitor
Start
.
10
a. We recommend that you carry out your test whilst sitting at a table with both of your feet flat on the
floor (ensuring the cuff is at the same height as your heart). This will place your arm and the monitor in
an ideal position for the best results.
b. Place the cuff on your selected arm. After applying the cuff and
your body is in a comfortable position, press the ‘start’ button.
A beep is heard and all display characters are shown for self-test
and the backlight is green. Please contact the service center if
any segments are missing.
c. Then the last used memory bank (U1 or U2) will blink. Press
‘memory’ button to change over to other bank. Confirm your
selection by pressing ‘start’ button. The current bank can also
be confirmed automatically after 5 seconds with no operation.