Kinetik Blood Pressure BPM1KTL - Manual (Page 14)

Using your Blood Pressure Monitor
13
Memory
The memory can store 2 users x 30 sets of measurements. The results will be automatically stored.
Once the memory has been filled with 30 sets of data, the 31st measurement when taken will be
stored as the most recent reading whilst the first reading you took will be automatically deleted.
To delete all stored results, press ‘memory’ once to memory mode. Press and hold ‘memory’ for 3
seconds. All results will be deleted.
Displaying Stored Results
To check the readings held in the memory, press the ‘memory’ button from standby mode. Press the
‘start’ button to toggle between user1 (U1) and user 2 (U2) then press ‘memory’ again to select. You
can now press the ‘memory’ button repeatedly to review each reading stored in the selected memory
bank. Press the ‘start’ button to return to standby mode.