Kinetik Blood Pressure BPM1KTL - Manual (Page 21)

Abnormality & Troubleshooting
LCD shows “Er 3”
LCD shows “Er 4”
Pneumatic system blocked or cuff is
too tight during inflation.
Measure again after 5 minutes.
If the monitor is still abnormal,
please contact your local retailer.
Take out batteries for five minutes,
and then reinstall all batteries.
Position the cuff correctly
and try again.
Pneumatic system leakage or cuff is
too loose during inflation.
LCD shows “Er 6”
Over 3 minutes while pressure
above 15 mmHg.
LCD shows “Er 5” Inflation above 300mmHg.
LCD shows “Er 7” EEPROM accessing error.
LCD shows “Er 8” Device parameter check error.
LCD shows “Er A”
No response when you press
button or load battery.
Pressure sensor parameter error.
Incorrect operation or strong
electromagnetic interference.
20
Note: If the LCD shows low battery symbol or error message, the backlight is amber.