Kinze 3600 Lift and Rotate Planter Rev. 5/14 - Manual (Page 141)

Inner Module Drive
ITEM PART NO. QTY.
(Per Module)
DESCRIPTION
1 --- - See “Seed Rate Transmission and Row Unit Drill Shafts” on page P135
2 --- - See “Contact Wheel and Drive Shaft(s)” on page P131
3 G10743
G10918
G10503
G10107 1
3
1
1 Hex Head Cap Screw, ⅝"-11 x 3¾"
Machine Bushing, ⅝", 14 Gauge (As Required)
Hex Jam Nut, ⅝"-11, Grade 2
Lock Nut, ⅝"-11
4 GA9558
GA9557
GA7154
G10038
GD10007
G11389
G10111 1
-
-
-
-
-
-
Idler W/Sprocket And Hardware, L.H. Side Of Planter
Idler W/Sprocket And Hardware, R.H. Side Of Planter
Sprocket W/Bearing, 18 Tooth
Hex Head Cap Screw, ½"-13 x 3"
Spacer, 1⅛" Long
Flat Washer, ½" SAE
Lock Nut, ½"-13
5 GD5857 1 Spring
6 GA5194 1 Sprocket, 50 Tooth
7 G10581
GD7889
G10168
G10205
G10111 1
1
2
2
1 Hex Head Cap Screw, ½"-13 x 2¼"
Bushing, 1" O.D. x 9∕16" I.D. x 7∕16" Long
Machine Bushing, ½", 7 Gauge
Washer, ⅝" SAE
Lock Nut, ½"-13
8 GA7154 1 Sprocket W/Bearing, 18 Tooth
9 GA5113 1 Sprocket, 28 Tooth
10 G10602 - Spring Pin, ¼" x 1½"
11 G3310-100
GR0912 1
-
Chain, No. 40, 100 Pitch Including Connector Link
Connector Link, No. 40
12 G10870
G10860 1
1 Clevis Pin, ⅜" x 1"
Retaining Ring, ⅜"
Model 3600 M0236-02
Rev. 7/11 P138
TM