Kinze 3600 Lift and Rotate Planter Rev. 5/14 - Manual (Page 56)

ITEM PART NO. QTY.
(Per Side)
DESCRIPTION
1 G10233 - Machine Bushing, 1", 10 Gauge (As Required)
2 GD11045 - Lock Clamp
3 G10130
G10923 -
- Square Head Machine Bolt, 5∕16"-18 x 1¾"
Flange Nut, 5∕16"-18, No Serration
4 GA2180 - Hanger Bearing, ⅞" Hex Bore
5 GD0914-48
GD0914-66 -
- Hex Shaft, ⅞" x 48" (No Holes), R.H. Side, 12 Row 30" And 16 Row 30"
Hex Shaft, ⅞" x 66" (No Holes), L.H. Side, 12 Row 30" And 16 Row 30"
6 GD0914-90
GD0914-128
GD0914-138 -
-
- Hex Shaft, ⅞" x 90" (No Holes), Both Sides, 12 Row 30"
Hex Shaft, ⅞" x 128" (No Holes), R.H. Side, 16 Row 30"
Hex Shaft, ⅞" x 138" (No Holes), L.H. Side, 16 Row 30"
7 GD0914-24
GD0914-33 -
- Hex Shaft, ⅞" x 24" (No Holes), 12 Row 30" W/Even-Row Push Row Unit
Hex Shaft, ⅞" x 33" (No Holes), 16 Row 30" W/Even-Row Push Row Unit
8 GA7052
GR1557
GR1297
GR1298
GR1294
GR1293 -
-
-
-
-
- U-Joint W/Grease Fitting, Female, 10¼" Long, 12 Row 30" And 16 Row 30"
Grease Fitting, 45°, Metric
Inboard Yoke And Outer Profile (10¼" U-Joint)
Inboard Yoke And Outer Profile (18⅛" U-Joint)
Cross And Bearing Kit
Yoke, ⅞" Hex
12 Row 30"
If Applicable
(Viewed From
Front Of Machine)
(RU134/TWL516)
Interplant Push Row Unit Drive (Style A)
TM
M0236-02 Model 3600
P53 Rev. 7/11