Klein Tools CL2300 - Manual (Page 4)

600V 400V CATIII 600V 400V CATIII
PRESS
PRESS
2300
7
5
2
3
6
1
9
1. AC/DC Current (large): < 600A
Features:
2. AC / DC Current (small): < 2000µA
Features: MAX/MIN RANGE HOLD
H. I. Battery Replacement
• When indicator is displayed on the LCD, batteries must be
replaced.
• Remove the back screw and replace 2 x AAA batteries.
J. Magnetic Back
• Attach instrument to metal for hands-free use.
K. Bar Graph
• The bar graph shows an approximate analog representation
of a measurement.
• The bar graph responds much faster than the digital display.
• The scale of the bar graph is zero to the maximum reading of
the selected range.
L. Temperature Adjustment
• Remove battery cover.
• Place temperature probe in distilled
water with stirred crushed ice
(a standard for 0°C and 32°F).
• Use a fi ne tip screwdriver to adjust
the screw recessed in the bottom
right corner of the battery cavity as
shown until the display reads 32°F.
FUNCTION INSTRUCTIONS
• Select AC or DC current source.
•
Current above 2000µA will damage instrument.
MAX/MIN RANGE HOLD
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
ZERO (DC)