Klein Tools Linemans Body Belts and Positioning Straps - Manual (Page 5)

5
How to Use a Lineman’s Body Belt
1.
These belts are for use only by individuals who
have been properly trained and who are qualified to
use this positioning equipment.
2.
Read all the warning labels and instructional mate-
rials provided with Klein’s lineman’s belts and related
OPE equipment. They provide important information
on usage and care. Leave all affixed labels in place,
and keep all instructions for future reference.
3.
Buckle the belt securely around the waist. Be
sure the buckle is fully closed, and the belt tab is in
its keeper. A lineman’s belt should fit snugly around
the waist. If you cannot achieve a snug fit, replace
the belt with one that fits properly.
.
When using a lineman’s belt, positioning
D-rings should be equally spaced on either side of
the lineman’s body.
5.
Attach one end of the positioning strap (or other
positioning connecting device) to one of the position-
ing D-rings.
6.
Pass the positioning strap around the pole (the
positioning anchorage), and then attach the other end
of the strap to the other positioning D-ring.
7.
Make sure by visual inspection that both snap
hooks freely engage the positioning D-rings and that
both keepers are closed completely.
8.
When properly connected, the positioning strap
will not be twisted, and both snap hooks will face
outward.
9.
Do not connect any tools, wires, or other snap
hooks to the positioning D-rings.
Note: See pages 6-7 for complete information on
how to use a Klein positioning strap.