Landoll PPF Floating Ring Pulverizer User Manual
Page 11
1199rev401
6K107
KLIK PIN
CLEVIS PIN, 1
PIN ASSEMBLY
CAST IRON
SPACER
SLEEVE,
1 7/16 O.D.
LOCK NUT, 1
CAPSCREW,
1 X 4 1/2
PIPE SPACER,
1 X 2 1/8
KLIK PIN
PIN ASSEMBLY
CAST IRON
SPACER
SLEEVE,
1 7/16 O.D.
KLIK PIN
SLEEVE,
1 1/4 O.D. x 1 15/16
Figure 5
With Category III Hitch
See Figure 5. Use the lower set of holes for the tractor lift arms to provide maximum transport
clearance. (Upper holes are for other model machines).
Install lower hitch pins with cast iron spacers inside of machine and 1-7/16" O.D. sleeves toward
outside. Secure with klik pins.
For the Quick Coupler:
Use the second lowest mast hole for the 1" x 4-1/2" cap screw and 1" x 2-1/8" pipe spacer. Install the
lock nut and tighten securely. Unused pin may be stored in top hole.
For the Three-Point Free Link Hitch:
Use the second highest mast hole and install the 1" clevis pin, 1-1/4" O.D. x 1-15/16" sleeve, and klik
pin. Install 1" x 4-1/2" cap screw and 1" x 2-1/8" pipe spacer in the bottom hole, attach lock nut, and
tighten securely.
Be sure all hitch points seat properly. Watch for possible interference
between pulverizer, tractor, and linkages when raising the first time.
Page 9