Landoll PPF Floating Ring Pulverizer - Manual (Page 12)

1199rev401 6K107
Field Operation
The floating ring pulverizer is designed with rings whose inside diameter is two to four inches
greater than the drum which supports them. This allows the packer wheels to follow the irregular
contours in your fields.
The drum assembly can be mounted to the frame in two ways. When mounted as shown in
figure 7A, the wheels will have a tendency to pack the soil. When the wheels are mounted as
shown in figure 7B, the wheels will act more like a rotary hoe and will have a tendency to loosen
the soil. To change the mounting of the wheel and drum assembly to the frame, follow these
steps:
1. Lower the wheels to the ground.
2. Support the frame with an tractor lift.
3. Remove the bolts which hold the pillow block bearings to the frame.
4. Raise the frame above the roller assembly.
5. Drive tractor with frame around to opposite side of rollers.
6. Re-attach the pillow block bearings to the frame.
DRUM
DIAMETER
WHEEL
INSIDE DIA.
FIGURE 6
2”- 4”
FIGURE 7A
FIGURE 7B
Page 10