Landoll 3130 SERIES WING PACKER - Manual (Page 24)

3-13 PULL TONGUE ADJUSTMENTS (LARGE MODELS ONLY)
This machine is equipped with a pull tongue
that is adjustable up and down a total of 11-1/2" on
2-7/8” increments with the tongue fully extended.
CAUTION
WITH THE WINGS FOLDED AND THE
UNIT IN THE TRANSPORT POSITION,
THE HITCH COULD SPRING UPWARD
WHEN UNHITCHED FROM THE TRAC-
TOR DRAWBAR.
3-13.1 Lower the machine to the working position
with the wings unfolded for stability.
3-13.2 Level the frame and securely block the
front and rear so it cannot tip. Also, block the
machine so it cannot roll forward or back-
ward.
3-13.3 Remove the 3/4" bolts and shims.
3-13.4 Position the hitch point at the desired
height. The tongue jack can be used to ad-
just the height. The 3/8" thick shims allow a
total adjustment of 11-1/2" adjustment at
2-7/8" increments.
3-13.5 Replace the shims and the 3/4" bolts.
(Tighten to 250 - 300 ft.-lbs.)
3-12
Figure 3-10 Hitch Adjustments (Large Models Only)