Landoll 3130 SERIES WING PACKER - Manual (Page 48)

4-7 ROLLERS
4-7.1 For maximum roller life, the rollers need to
touch each other across the gangs. This ad-
justment is made by loosening the u-bolts
which attach the bearing standards. The
bearing lock collars must also be loosened.
Bump the standard and the u-bolt toward the
center of the machine until the rollers touch
each other. Retighten the bearing lock col-
lars. Retighten the u-bolts to at least 200 foot
pounds of torque. Be careful not to put an
end thrust or side load on the bearings (See
Figure 4-2).
4-7.2 This adjustment will need to be made twice
during the first 200 acres of operation. After
the initial adjustments have been made, in-
spect the packer routinely and adjust rollers
when necessary.
4-8 ELECTRICAL SYSTEM AND REFLECTORS
4-8.1 All Wing Packers are designed to meet
current industry location and visibility stan-
dards for conspicuity reflectors (See Figure
3-7).
4-8
Figure 4-2 Rollers