Leica Biosystems VT1000 A - Manual (Page 14)

14 Operating Manual V 1.1 – 01/2010
4. Setup the Instrument
4.4.1 Checking the performance requirements
The Vibratome VT1000 A is available in different versions for operation
with different supply voltage.
Before connecting the instrument to the power supply, check to make
sure that the product number (39 072XXX-X) and the marking for the input
voltage on the rear side of the instrument match in order to ensure that
the correct version for the supply voltage available at the location has
been delivered.
For the assignment of the product number to the respective version, refer
to the following table.
Product number Instrument version
39072018 Leica VT1000 A Starter 110V, 60Hz
39072018-1 LEICA VT1000 A Starter 110V, 50Hz
39072018-2 LEICA VT1000 A Starter, 220V, 50Hz
39072018-3 LEICA VT1000 A Starter 220V, 60Hz
39072020 LEICA VT1000 A Professional 110V, 60Hz
39072020-1 LEICA VT1000 A Professional 110V, 50Hz
39072020-2 LEICA VT1000 A Professional 220V, 50Hz
39072020-3 LEICA VT1000 A Professional 220V, 60Hz
39072022 LEICA VT1000 A Pro Gold 110V, 60Hz
39072022-1 LEICA VT1000 A Pro Gold 110V, 50Hz
39072022-2 LEICA VT1000 A Pro Gold 220V, 50Hz
39072022-3 LEICA VT1000 A Pro Gold 220V, 60Hz
110 V instruments have a max. amperage of 1.0A
220 V instruments have a max. amperage of 0.5 A
4.4 Connection to power supply system
The product number and all corresponding connection values are
located on the nameplate on the rear side of the instrument.
See Fig. 1, page 5