Binatone 710 - Manual (Page 21)

21
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
After setting the OGM1, briefly press the EXIT/
button again. You will hear, “Announcement 2.”
Press and hold the OGM button until you hear a ‘beep.’
Ö
The display shows OGM RECORDING OGM RECORDING OGM RECORDING OGM RECORDING OGM RECORDING and
the message counter starts to count.
Start recording your OGM2. Speak directly
into the Base
distance of about 15 cms. (6 inches).
As soon as you have finished speaking, press
ON-OFF button to stop recording.
Ö The display shows PLAY OGM PLAY OGM PLAY OGM PLAY OGM PLAY OGM, and your
recorded message will be played back for
your approval.
Answering Machine System continue...
To record
OGM 2
NOTE: The machine does not record messages with
Announcement 2 selected; make sure Announcement 1 is
selected if you want callers to leave messages.
1
2
3
ON-OFF
unit’s Microphone from a
the EXIT/
Press and release the EXIT/ON-OFF button to
switch between OGM1 and OGM2.
Ö The machine does not record messages with
OGM2 (Announcement 2) selected; make sure
OGM1 is selected if you want callers to leave
messages.
To switch
between
OGMs
Press and hold the EXIT/ON-OFF button to
turn ON the answering system. ÖYou will hear,
“Answering machine ON.Announcement one” The
display shows ANSWER ON ANSWER ON ANSWER ON ANSWER ON ANSWER ON and the MESSAGE
light will light up.
Press and hold the EXIT/ON-OFF button again
to turn OFF the answering system.
Ö You will hear, “Answering machine OFF.” The
display shows ANSWER OFF ANSWER OFF ANSWER OFF ANSWER OFF ANSWER OFF and the
MESSAGE light will turn off.
Note: Once turned OFF, you can still call the
machine and it will answer after 15 rings.
To turn 1
2
the
Answering
machine
ON or OFF