Binatone 710 - Manual (Page 5)

3. Desk/Wall mount installation
5
To place the Spirit 710 on a desk, connect
the stand to the bottom of the phone in the
slots near the rear of the base as shown below. Desk Mount
Insert the rigid clips of the stand into the slots
on the bottom of the phone (nearer the centre of
the base). Press down firmly until the flexible
clips clicks into place.
To remove the stand, (1) pinch the flexible
clips, (2) pull back the stand, and then (3)
slide up and forward (3) as shown below.
To place the Spirit 710 on a wall, connect
the stand to the bottom of the phone in the
slots near the front of the base as shown below. Wall Mount
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.