Binatone 710 - Manual (Page 28)

2 8
13. Troubleshooting
The Spirit 710 must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself - you could make the
problem worse and invalidate the Guarantee.
ALWAYS check „ you have followed the steps listed in Section 2 to
first that: install and set up your Spirit 710.
„ all connectors are firmly inserted in their sockets.
„ mains power is switched on at the socket.
Everyday use
“I cannot make or Make sure you’re using the telephone line cable that
answer calls.” was supplied with your Spirit 710. Other telephone
line cables might not work.
Switch off power at the mains socket, wait for a few seconds
and then switch back on. This may solvethe problem.
“The phone does Make sure you’re using the telephone line cable
not ring” that was supplied with your Spirit 710. Other
telephone line cables might not work.
Set the ringer volume to High, using the switch at
the back of the unit.
Check that the total REN value of all equipment
connected to your telephone line is not more than
4. Disconnect one or more telephones.
“The phone does Make sure you’re using the telephone line cable
not dial” that was supplied with your Spirit 710. Other
telephone line cables might not work.
“The Caller You need to subscribe to Caller Display service
Display feature
isn’t working.” details on how to subscribe.
!
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
from
local
The caller may have withheld their number by
dialing 141. Or they may be calling from a network
that does not transmit the Caller Display (for
example, it may be an international call).
your local telephone company. Contact the
telephone lcompany for