Binatone 710 - Manual (Page 29)

Troubleshooting continue...
Answering Machine
“The machine The machine’s memory may be full. You need to
won’t record enough recorded messages to free at least one minute
any messages” recording time. Or you can delete all
to make room for new ones
Make sure the machine is switched on - the
MESSAGE light should be on.
Make sure you have not selected OGM2 - with OGM2
(see page 20).
“Remote
Make sure you are using the correct remote operation security code
.
Check that you are using a suitable tone-dialling phone.
Some cordless or mobile phones do not generate
continuous tones and so are not ideal for remote operation.
Don’t leave more than 10 seconds between key
presses; otherwise, your call will be cut off.
Using your Spirit 710 on a PBX
“Last Number When you first make a call, try pressing the REDIAL/
Redialand/or PAUSE button for a pause between the outside line
memory dialing access digit (e.g. 9) and the telephone number.
don’t work on a You should later be able to redial the number.
When storing numbers in memory, you can include
the outside line access digit (e.g. 9) with each
number.
29
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
Be sure to wait until the second ring before answering.
PBX.
delete
doesn’t work.”
recorded messages
If your PBX requires you to wait for a second Dial
tone before dialing the telephone number, press the
REDIAL/PAUSE button for a pause between the
access digit and the number.
selected, callers cannot leave messages