Leica Biosystems M205A - Manual (Page 62)

Leica M series Manual 62
Graticules
2. Clamp the graticule on the insert, applying
moderate pressure. Ensure that the grati-
cule fits tightly.
3. Screw the insert and graticule firmly into
place and replace the eyepiece in the tube.
4. You can now align the graticule by rotating
the eyepiece in the tube and then tighten-
ing it using the clamping screw.
Use with the AX carrier
If possible, measure with the micro-
scope carrier AX in vertical position. The
measurements are more accurate without the
convergence angle in the stereoscopic image.
Use
Graticules make length measurements and
counting easier, particularly for workstations
that are not equipped with a digital camera and
LAS software.
The graticules for length measurements and
numbering are fitted in mounts and are inserted
into the eyepieces.
1. Screw the insert off of the eyepiece.