Leica Biosystems SmartTouch - Manual (Page 13)

Leica SmartTouch™ Manual 13
Required tools
Ϙ
None
The Leica SmartTouch™ is supplied with
power via the focusing drive. No additio-
nal power supply is required.
Assembly
1. Place the Leica SmartTouch™ on the left
or right side of your microscope on a level,
stable substrate.
2. Connect the CAN-bus cable provided to the
Leica SmartTouch™.
3. Connect the other end of the CAN-bus cable
to the focusing drive of your microscope.
In order for the Leica SmartTouch™ to
function properly, the CAN-bus cable
must only be connected to the focusing drive.
Assembly