Leica Biosystems SmartTouch - Manual (Page 25)

Leica SmartTouch™ Manual 25
Configuration of the Objective Nosepiece
The encoded objective nosepiece holds
two objectives or FluoCombi™ so that
they can be exchanged by simply turning
them.
Preparations
1. Install the encoded objective nosepiece and
the two objectives on the optics carrier.
Registering the first objective
1. On the Leica SmartTouch™, touch the
"Config." tab.
2. In the left area, touch the symbol for the
microscope accessories.
3. Rotate the first objective so it is in the beam
path of the microscope carrier.
4. Touch the symbol for detecting the first
objective.
5. Touch the type of objective that is in the
beam path.
(Continued on next page)