Changing the reference coordinates – Leica Biosystems SmartTouch User Manual
Page 47
Advertising
Leica SmartTouch™
Manual
47
The coordinates of the motorized
mechanical stage are based either on the
bottom left corner of the stage or a zero point
defined by the user.
Changing the reference coordinates
1. Touch the "Stage" tab.
2. Touch the desired measurement method:
Ϙ
Absolute reference point (left symbol):
Shows the distance between the bottom
left corner and the current position.
Ϙ
Relative reference point (right symbol):
Shows the distance between the current
position and the zero point defined by the
user.
(Continued on next page)
Changing the Reference Coordinates
Advertising