Lenze 8400 motec Mounting Instructions - Manual (Page 37)

About this documentation
Validity information
1
l
37 EDK84DGDVBxxx4 DE/EN/FR/ES/IT 5.3
1.3 Validity information
These instructions are valid for 8400 motec controllers with the following type
designation:
Type designation From HW From SW
E84DGDVBxxx4 VA 01.00
Further information on the type code can be obtained from the "Product
description" chapter.
1.4 Conventions used
This documentation uses the following conventions to distinguish between
different types of information:
Type of information Identification Examples/notes
Spelling of numbers
Decimal separator Point In general, the decimal point is used.
For instance: 1234.56
Warnings
UL warnings
J
Given in English and French
UR warnings O
Text
Program name » « PC software
For example: »Engineer«, »Global
Drive Control« (GDC)
Icons
Page reference ^ Reference to another page with
additional information
For instance:
^ 16 = see page 16
Documentation reference , Reference to another documentation
with additional information
For example:
, EDKxxx = see
documentation EDKxxx