Lenze 8400 motec Mounting Instructions - Manual (Page 40)

Safety instructions 2
l
40 EDK84DGDVBxxx4 DE/EN/FR/ES/IT 5.3
2 Safety instructions
{
Danger!
Dangerous voltage
ƒ The power terminals carry dangerous voltages for up to 3
minutes after mains disconnection.
Possible consequences:
ƒ Death or severe injury if the power terminals are touched.
Protective measures:
ƒ Switch off the mains voltage and wait at least 3 minutes before
starting to work on the device.
ƒ Check that all power terminals are deenergised.
Warning by symbols
Icon Description
{
Long discharge time:
All power terminals remain live for up to 3 minutes after mains disconnection!
}
High leakage current:
Carry out fixed installation and PE connection in accordance with EN 61800−5−1!
'
Electrostatic sensitive devices:
Before working on the device, the staff must ensure to be free of electrostatic charge!
|
Hot surface:
Use personal protective equipment or wait until devices have cooled down!
Please also observe more important information on device and safety
technology provided on the enclosed CD−ROM!
Original − English
J
Warnings!
Operation of this equipment requires detailed installation and
operation instructions provided in the Hardware manual intended
for use with this product. This information is provided on the
CD−ROM included in the container this device was packaged in. It
should be retained with this device at all times. A hard copy of this
information may be ordered by phone or e−mail, printed on the back
of this document.