Lenze E82ZWBRE - Manual (Page 31)

Technical data
General data and operating conditions
3
EDK82ZWBRE DE/EN/FR 6.0
31
l
H1_Daten−E82ZWBRB_Schalthaeufig_Fussnote_EN
3 Technical data
General data and operating conditions
Function
The electronic brake switch enables the control of the electromechanical holding brake in
a brake motor.
Application range
The electronic brake switch can be used with the following standard devices:
Standard device Mounting place
8200 motec frequency inverter E82MVxxx_4B
with standard I/O or application I/O function module In the motec
Activation via the digital output of the
function module
8200 motec frequency inverter E82MVxxx_4B
Variants V152, V153 In the motec
Activation via the integrated digital
output of the motec
8200 vector frequency inverter E82xVxxxKxC
with standard I/O or application I/O function module In the control cabinet
Activation via the digital output of the
function module
Other Lenze controllers
with digital output +15 ... +30 V, 5 ... 10 mA In the control cabinet