Lenze E94AZCDM100 - Manual (Page 23)

Safety instructions
Residual hazards
2
l
23 EDK94AZCDM DE/EN/FR/ES/IT 1.0
2.2 Residual hazards
{
Danger!
Dangerous electrical voltage
All power terminals remain live for up to three minutes after mains
disconnection.
Possible consequences:
ƒ Death or severe injuries when touching the power terminals.
Protective measures:
ƒ Switch off the power supply and wait for at least three minutes
before working on the power terminals.
ƒ Make sure that all power terminals are deenergised.
O
Warnings!
Conditions of Acceptability:
When used in the end−product equipment the following are among
the considerations to be made.
ƒ These devices are intended to be used only with Lenze AC motor
controllers, Series Cat. No. E94ASxE, E94AMxE, E94APxE or
E94ARxP
followed by three digits numbers, which are UL Listed in File
E132659, evaluated to 500 Vac.
ƒ This device is suitable for use in a surrounding air temperature of
45 °C or 55 °C, as specified in the Electrical Ratings.